Nokia 6300 User Guide - Page 10

Get started To back up OMA DRM protected content, use the backup feature of Nokia PC Suite. If your device has WMDRM protected content, both the activation keys and the content will be lost if the device memory is formatted. You may also lose the activation keys and the content in case the files on your device get corrupted. Losing the activation keys or the content may limit your ability to use the same content on your device again. For more information, contact your service provider. 2. Get started Install SIM card and battery Always switch the device off and disconnect the charger before removing the battery. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or other vendor. This device is intended for use with a BL-4C battery. Always use original Nokia batteries. See "Nokia battery authentication guidelines", p. 48. The SIM card and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting, or removing the card. 1. To remove the back cover of the device, press and slide the cover (1). Remove the battery as shown (2). 2. Open the SIM card holder (3). Insert the SIM card with the gold-colored contact surface facing down into the holder (4). Close the SIM card colder (5). 3. Observe the battery contacts (6), and insert the battery (7). Slide the back cover into its place (8). Insert a microSD card Use only compatible microSD cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card. 10