NordicTrack T12 Si Cwl Treadmill Uk Manual - Page 11
Attach the Latch Bracket 14 and Storage Latch
View all NordicTrack T12 Si Cwl Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
11. Insert the wires from the console assembly into the handrail assembly. Attach the console assembly to the handrail assembly with four 1/4" x 3/4" Bolts (5). Be careful not to pinch the wires. 11 Console Assembly Handrail Assembly 12. Plug in the power cord (see page 13) and insert the key into the console. Press the Incline de- 12 crease button on the console until the incline reaches the minimum incline level. Remove the key and unplug the power cord. Raise the Frame (56) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (53) so that the large barrel and the Latch Knob (54) are in the positions shown. Attach the Latch Bracket (14) and Storage Latch (53) to the Base (83) with two 3/8" x 2" Bolts (4) and two 3/8" Nuts (8). Attach the upper end of the Storage Latch (53) to the bracket on the Frame (56) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the bracket. Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 25). Wires 5 5 56 8 4 53 54 Large Barrel 14 83 8 4 13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 27 and 28). 11