NordicTrack T12 Si Cwl Treadmill Uk Manual - Page 8

4. Identify the Right Upright (78) and the Right 4 Upright Spacer (79), which are marked with "Right" stickers. 78 Insert the Upright Wire (38) through the Right Upright Spacer (79) as shown. Set the Right 38 Upright Spacer on the Base (83). Be careful 38 not to pinch the Upright Wire. Have a second person hold the Right Upright 79 Long Tie (78) near the Base (83). See the inset drawing. Tie the long tie in the Right Upright securely around the end of the Upright Wire (38). Then, 83 pull the other end of the long tie until the Upright Wire is routed completely through the Right Upright. 78 38 Long Tie 5. Hold a Bolt Spacer (80) inside the lower end of the Right Upright (78). Insert a 3/8" x 4 1/2" Bolt 5 (6) with a 3/8" Star Washer (9) into the Right Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (80), 3/8" x 4 1/2" Bolt (6), and 3/8" Star Washer (9). Then, set the Right Upright in the Right Upright Spacer (79). Be careful not to pinch the Upright Wire (38). Partially tighten the 3/8" x 4 1/2" Bolts (6); do not fully tighten the Bolts yet. 6 78 9 79 38 80 6. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (56) so the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (B) and the shipping bracket (C). Attach a Base Foot (81) to the Base (83) in the location shown with a #8 x 1" Tek Screw (2) and a Base Foot Spacer (13). Then, attach another Base Foot (81) with only a #8 x 1" Tek Screw (2). Attach a Wheel (84) with the 3/8" x 2" Bolt (4) and the 3/8" Nut (8) that you removed in step 1. Do not overtighten the Nut; the Wheel must turn freely. 6 B C 81 2 8 83 56 4 13 84 2 81 8