NordicTrack T12 Si Cwl Treadmill Uk Manual - Page 9

7. Set the Left Upright Spacer (76) on the Base (83). Hold a Bolt Spacer (80) inside the lower 7 end of the Left Upright (74). Insert a 3/8" x 4 1/2" Bolt (6) with a 3/8" Star Washer (9) into 6 the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (80), 3/8" 9 x 4 1/2" Bolt (6), and 3/8" Star Washer (9). Then, set the Left Upright in the Left Upright Spacer. Partially tighten the 3/8" x 4 1/2" Bolts (6); do not fully tighten the Bolts yet. With the help of a second person, tip the tread- 80 mill so that the Base (83) is flat on the floor. 74 76 83 8. Remove the plastic ties from the handrail assembly. If necessary, press the 5/16" Cage Nuts (33) into place. Have a second person hold the handrail assembly near the Uprights (74, 78). Connect the Upright Wire (38) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Remove the wire tie from the Upright Wire (38). 8 33 Plastic Tie Console Wire 38 Handrail Assembly 74 33 Plastic Tie 38 Console Wire Wire Tie 78 9