Oki B6500n B6500 Network Guide - Page 36

-C OPTION (LPR COMMAND) This section explains the functions which can be specified and printing operations which will be affected by the -C option. The -C option is available only when the SunOS directs the printer to enter the spool mode. Important: • When the PostScript logical printer that was configured on the printer web page and -C option of "lpr" command have been specified simultaneously, some of the actions cannot be guaranteed to work. Also, when specifying the PostScript logical printer as a default printer on Unix, it is recommended not to user the -C option by "lpr" command. FUNCTION The following items can be set up by using the -C option: NOTE Any parameter other than below becomes invalid if specified. Selecting a Paper Tray When selecting a paper tray, either the paper size or the tray itself is specified. If the paper size is specified, the printer automatically searches and selects the tray where the specified paper is loaded. The following parameters can be specified: PARAMETER INTRAY1/intrayl INTRAY2/intray2 INTRAY3/intray3 INTRAY4/intray4 A4/a4 B5/b5 A5/a5 LETTER letter LEGAL/legal DESCRIPTION Selects Tray 1. Selects Tray 2. Selects Tray 3 (option). Selects Tray 4 (option). Selects the tray where A4 paper is loaded. Selects the tray where B5 paper is loaded. Selects the tray where A5 paper is loaded. Selects the letter size. Selects the legal size (8.5 x 14). B6500 Network Guide> 36