Oki C711WT C711WT Users Guide - Page 12
Hanging, Display, Language, Etting, Started
View all Oki C711WT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
When the rear paper stacker is folded down paper exits the printer through the rear of the printer and is stacked here face up. This is mainly used for heavy print media and transparency/transfer media. When used in conjunction with the multi purpose feed tray, the paper path through the printer is essentially straight. This avoids bending the paper around curves in the paper path and enables feeding of up to 250g/m² media. CHANGING THE DISPLAY LANGUAGE The default language used by your machine for display messages is English. If required, this can be changed using the Panel Language Set-up utility. GETTING STARTED POWER SAVING MODE If you do not use the machine for a while, it will enter the power saving mode to control the power consumption of the device. To cancel or initiate power saving mode, press the Power Save / Wake Up button on the control panel. NOTE If your machine is connected locally (via USB or parallel*), when it transitions to Sleep mode its status is viewed as off-line. To use the printer in this state, you must press the Power Save / Wake Up button to exit sleep mode. SWITCHING OFF 1. Press the Enter button on the control panel to enter the menu. 2. Press the Menu down button and scroll to the Shutdown menu. 3. Press the Enter button. 4. Press the Enter button to continue. 5. Press the Enter button to execute. 6. At the prompt, turn the power switch OFF. Introduction > 12