Oki C711WT C711WT Users Guide - Page 52
Enter, Enable, Attention LED, dd/mm/yyyy, Menu up
View all Oki C711WT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
ITEM Flash Memory Setup System setup Time Setup Change Password Initialize SETTINGS Execute Near Life Status Enable/Disable Near Life LED Enable/Disable Date Format Time Zone Daylight Saving Time Setting New Password mm/dd/yyyy dd/mm/yyyy yyyy/mm/dd -13:00 ~ 0:00 ~ +13:00 On Off 01/01/2000 00:00 ~ 01/01/2009 00:00 ~ 31/12/2091 23:59 xxxxxxxxxxxxxx Verify password xxxxxxxxxxxxxx EXPLANATION Initializes Resident FLASH. When the Enter button is pressed, the following confirmation message appears. Are You Sure? Yes/No If No is selected, the previous menu display resumes. If Yes is selected, the following confirmation message displays. Execute Now? Yes/No If No is selected, the previous menu display resumes. At this time, the request to execute FLASH initialization is put into the memory and initialization will be executed at power cycle. If Yes is selected, shutdown takes place, and FLASH is initialized at power Off/On cycle. Set LCD panel control at the time of near-life warning for drum, fuser and belt. Enable: Display a near-life warning. Disable: Do not display a near-life warning. Controls the settings of the Attention LED when near end of life warning of toner, drum, fuser, or belt occurs. Attention LED is lit when enabled, not lit if disabled. (Displays LCD message.) The temporary recovery by opening and closing of the cover in Life error is not included. Set desired date format. Enter the time zone for your country in relation to GMT. Set in quarter units within the range. Use the Menu up/down buttons to increment/decrement and press the Enter button to set and proceed to the next digit. Enable/disable daylight saving setting. Set current date and time. Display format follows the settings selected in Date Format. Sets a new password to enter Admin Setup menu From 6 to 12 alpha/numeric digits can be entered. Forces the User to input the new password to enter Admin Setup. From 6 to 12 alpha/numeric digits can be entered. Menu functions > 52