Oki C711WT C711WT Users Guide - Page 51

ITEM Print Setup (cont.) PS Setup Color Setup Memory Setup SETTINGS Resolution X Dimension Y Dimension Network Protocol 600dpi 600x1200dpi 600dpi multilevel 64 mm ~ 210 mm ~ 216 mm 127 mm ~ 297 mm ~ 1321 mm ASCII/RAW Parallel Protocol ASCII/RAW USB Protocol ASCII/RAW CMY 100% Density Enable/Disable Receive Buffer Size Resource Save Auto 0.5 megabyte 1 megabyte 2 megabyte 4 megabyte 8 megabyte 16 megabyte 32 megabyte Auto Off 0.5 megabyte 1 megabyte 2 megabyte 4 megabyte 8 megabyte 16 megabyte 32 megabyte EXPLANATION Sets default resolution. Specifies paper width of Custom paper as a default value. Sets a paper size at right angles to the paper run direction. Specifies paper length of Custom paper as a default value. Sets a paper size in the same direction as the paper run direction. Specifies PS communication protocol mode of data from NIC port. (In RAW mode, Ctrl-T is invalid). PS models only. Specifies PS communication protocol mode of data from Centronics port. (In RAW mode, Ctrl-T is invalid). PS models only. Specifies PS communication protocol mode of data from USB port. (In RAW mode, Ctrl-T is invalid). PS models only. Enable/Disable 100% output against the CMY100% TRC compensation. Ordinarily, the TRC compensation function holds control for the appropriate print density; thus 100% output is not always possible. Selecting ENABLE will enable 100% output in any individual color. The actual print, including the TRC compensation function is limited to an appropriate area. This function is for special purposes such as specification in CMY color reduction in PS. Sets the size of receive buffer Sets the size of resource saving area. Menu functions > 51