Oki C711WT C711WT Users Guide - Page 33
Layout, Advanced, Paper/Output, PostScript, Custom Size, Paper Size, paper feed direction
View all Oki C711WT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
CUSTOM PAGE SIZE This feature enables printing on non-standard sized print media. The multipurpose tray is used for feeding non-standard media sizes. Print media width can be from approximately 64mm to 216mm, and its length can be from 127mm to 355.6mm. Actual limits vary slightly depending on which printer driver you use and your computer's operating system. Some applications software may not produce the desired results with non-standard print media sizes, and some experimentation may be required to obtain the results you want. WINDOWS POSTSCRIPT 1. In the driver's Layout tab, click Advanced. 2. In the Advanced Options window, under Paper/Output, choose PostScript Custom Page Size from the Paper Size drop-down list. 3. In the PostScript Custom Page Size Definition window, Choose your paper feed direction from the dropdown list. The available choices are: Short edge first Long edge first Short edge first flipped Long edge first flipped The page is portrait (tall) format and you will feed the top of the page into the printer. The page is landscape (wide) format and you will feed the top of the page into the printer. The page is portrait (tall) format and you will feed the bottom of the page into the printer. The page is landscape (wide) format and you will feed the bottom of the page into the printer. Notice that the size ranges available swap places when you change the paper feed direction between a portrait and a landscape choice. Remember that the width of the multipurpose tray is limited to the width of an A3 sheet (297mm), so if your paper is longer than this you will have to feed it short edge first. Finishing options > 33