Oki OKIPAGE10i Flash Simm Hardware Installation Guide - Page 15
Remove and save the screws on the metal plate covering
View all Oki OKIPAGE10i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
5 Pull the side panel out and remove it from the printer, then close the cover to protect the image drum from light while you are installing the SIMM. 6 Remove and save the screws on the metal plate covering the internal board, then lift the plate out. | Hardware Installation Guide: English 15
|
Hardware Installation Guide: English
15
5
Pull the side panel out and remove it from the printer, then
close the cover to protect the image drum from light while
you are installing the SIMM.
6
Remove and save the screws on the metal plate covering
the internal board, then lift the plate out.