Oki OKIPAGE10i Flash Simm Hardware Installation Guide - Page 16
Installing the SIMMs
![]() |
View all Oki OKIPAGE10i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installing the SIMMs 1 Locate the SIMM sockets on the board. The top socket (1) is used for a Flash SIMM. 2 Hold the SIMM with the metallic contact edge (1) toward the printer and the notched corner (2) to the left. 3 Angle the SIMM down about 45°, then insert the contact edge into the top socket and lift the board until it locks in place. |16 OKI Flash SIMM
![](/manual_guide/products/oki-data-okicolor8-flash-simm-hardware-installation-guide-b6d9290/16.png)
16
OKI Flash SIMM
|
Installing the SIMMs
1
Locate the SIMM sockets
on the board. The top socket (
1
)
is used for a Flash SIMM.
2
Hold the SIMM with the metallic contact edge (
1
)
toward
the printer and the notched corner (
2
) to the
left.
3
Angle the SIMM down about 45°, then insert the contact
edge into the
top
socket and lift the board until it locks in
place.