Oki OKIPAGE10i Flash Simm Hardware Installation Guide - Page 9
Installing the SIMM Card
 |
View all Oki OKIPAGE10i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4 Remove and save the two large screws on the right side, which hold the side panel in place. 6 Remove and save the two screws on the left of the metal plate covering the internal board, then pull the plate out about an inch and lift it out. 5 Pull the side panel out and remove it from the printer. Installing the SIMM Card 1 Locate the three SIMM sockets on the board. SIMM sockets | Hardware Installation Guide: English 9
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
-
17
-
18
-
19
 |
 |
|
Hardware Installation Guide: English
9
4
Remove and save the two large screws on the right side,
which hold the side panel in place.
5
Pull the side panel out and remove it from the printer.
6
Remove and save the two screws on the left of the metal
plate covering the internal board, then pull the plate out
about an inch and lift it out.
Installing the SIMM Card
1
Locate the three SIMM sockets on the board.
SIMM
sockets