Oki OkiPOS406 OkiPOS406 Users Guide - Page 16
Self Printing, Hexadecimal Dump Mode
View all Oki OkiPOS406 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ENGLISH 4-3. Self Printing (1) Test Printing Turn the power on while holding the FEED button depressed. Test printing will be performed according to the Ver. No., DIP switch settings and character order. When the FEED button is depressed at the time of the end of test printing, only the characters will be printed out repeatedly. (2) Hexadecimal Dump Mode Open the printer cover, then turn the power on while holding the FEED button. When the cover is closed, "*** HEX DUMP PRINTING ***" is printed, and the printer enters the Hexadecimal Dump Mode. Each of the signals sent from the computer to the printer will be printed out in hexadecimal code. This function allows you to check if a control code sent to the printer by the program being used is correct or not. The final line is not printed if its data is less than one full line. However, if the FEED button is pushed, the final line is printed. To turn off the mode, it is necessary to turn off the printer completely. - 13 -