Oki OkiPOS406 OkiPOS406 Users Guide - Page 7
Consumable Parts and AC Adapter
View all Oki OkiPOS406 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ENGLISH 2. Consumable Parts and AC Adapter When consumable parts have run out, use those specified in the table below. Make sure that the AC adapter specified in the table is used. Use of consumable parts or AC adapter which are not specified in the table may result in damage to the printer, fire or electric shock. (1) Roll paper specification Thermal paper Thickness: 65~85 µm Width: 79.5±0.5 mm (57.5±0.5 mm when the optional paper roller holder is used) Outer roll diameter: ø90 mm or less Take up paper roll width: 80 +0.5 -1 mm or (58 +0.5 -1 mm when the optional paper roller holder is used) Core outer/inner diameter Paper thickness Core outer Core inner 65~85 µm ø18±1 mm ø12±1 mm Printed surface: Outer edge of roll Tail end handling: Do not use paste or glue to secure the roll paper or its core. Do not fold the tail end of the paper. (2) Recommended paper Mitsubishi Paper Mills Limited P220AG (normal type paper), 65 µm (thickness) HP220A (high image stability paper), 65 µm (thickness) HP220AB-1 (high image stability paper), 75 µm (thickness) P220AB (normal type paper, card ticket), 85 µm (thickness) Oji Paper Co., Ltd. PD150R (normal type paper), 75 µm (thickness) PD160R (high image stability paper), 65/75 µm (thickness) Nippon Paper Industries TF50KS-E2C (normal type paper), 65 µm (thickness) Depending on the type and thickness of the paper, it may be necessary to change the settings for printing darkness. To change the darkness settings, use the printing darkness settings command 'd' n. Refer to the separate programmer's manual for details. - 4 -