Olympus FE 340 FE-340 Instruction Manual (English) - Page 23

ISO...Changing the ISO sensitivity AUTO Sensitivity is automatically adjusted according to the conditions of the subject. 64/100/200/400/ 800/1600/3200 A low value lowers the sensitivity for daylight shooting of clear, sharp pictures. The higher the value, the better the camera's light sensitivity and ability to shoot with a fast shutter speed and in low light conditions. However, high sensitivity introduces noise into the resulting picture, which may give it a grainy appearance. • When [3200] is selected, [IMAGE SIZE] is limited to [I] or lower. FINE ZOOM Zooming in on your subject without reducing image quality OFF /ON Combines optical zoom and image capture to enable greater magnification (Max. 15x (FE-320/X-835/C-540)/ Max. 25x (FE-340/X-855/C-560)). There is no deterioration in the image quality since data conversion (by increasing pixel resolution) is not performed. • The available magnification varies depending on the [IMAGE SIZE] setting. • The available [IMAGE SIZE] setting is [H] or lower. R (still pictures Recording sound with still pictures OFF /ON When activated [ON], the camera will record about 4 seconds of audio after the picture is taken. When recording, aim the camera microphone at the source of the sound you want to record. Microphone PANORAMA Creating a panoramic picture Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master software on the provided CD-ROM. An Olympus xD-Picture Card is required for panorama shooting. Connects pictures from left to right Connects pictures from bottom to top Y: The next picture is connected at the right edge. X: The next picture is connected at the left edge. O: The next picture is connected at the top. N: The next picture is connected at the bottom. Use the arrow pad to specify at which edge you want to connect the pictures; and then compose your shots so that the edges of the pictures overlap. The part of the previous picture where it will be joined to the next picture does not remain in the frame. You have to remember what the part in the frame looked like and take the next picture so it overlaps. Menu operations EN 23