Olympus FE 340 FE-340 Instruction Manual (English) - Page 37

Using OLYMPUS Master Using the USB cable provided with your camera, you can connect the camera and computer and download (transfer) the images to your computer using the OLYMPUS Master software, also provided with the camera. Prepare the following items before starting. OLYMPUS Master 2 CD-ROM USB cable Computer that meets the operating environment (P. 37). What is OLYMPUS Master? OLYMPUS Master is a software application for managing your digital images on your computer. Using OLYMPUS Master Install the OLYMPUS Master software Before installing the OLYMPUS Master software, please confirm that your computer is compatible with the following system requirements. For newer operating systems, please refer to the Olympus web site as shown on the back cover of this manual. Operating environment Windows Macintosh OS Windows 2000 Professional/XP Home Mac OS X v10.3 or later Edition/XP Professional/Vista CPU Pentium III 500 MHz or later Power PC G3 500 MHz or later Intel Core Solo/Duo 1.5 GHz or later RAM 256 MB or more 256 MB or more Hard disk capacity 500 MB or more 500 MB or more Monitor 1,024 × 768 pixels or more 1,024 × 768 pixels or more 65,536 colors or more (16.77 million colors 32,000 colors or more (16.77 million colors or more recommended) or more recommended) Other USB port or IEEE 1394 port Internet Explorer 6 or later QuickTime 7 or later recommended DirectX 9 or later recommended USB port or IEEE 1394 port (FireWire) Safari 1.0 or later (1.3 or later recommended) QuickTime 6 or later Note • Use a computer with a pre-installed operating system. Operations are not guaranteed on home-built computers or computers with an updated operating system. • Operations are not guaranteed when using an added USB port or IEEE 1394 port. • To install the software, you must log on as a user with administrators' privileges. • If you are using Macintosh, be sure to remove the media (drag & drop onto the trash icon) before performing the following operations. Failure to do so could result in unstable computer operation and the need to reboot. • Disconnect the cable connecting the camera to the computer • Turn off the camera • Open the camera's battery/card compartment cover For how to install the OLYMPUS Master software, refer to the installation guide included in the CDROM. EN 37