Olympus LS-100 LS-100 Instruction Manual (English) - Page 51
Partially erasing a file
View all Olympus LS-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Erasing Partially erasing a file You can erase an unwanted part of a PCM format file recorded with this recorder. 3 Press the ERASE button again at the position where you wish to end the partial erase. 1 Play the file you wish to partially erase. • [Start point] and [End point] will flash alternately on the display. 3 Erasing • Locate the beginning of the part you wish to erase. If the file is long, you can use the 9 button to locate the beginning of the part to erase. 2 At the beginning of the part to erase, press the ERASE button. • [Erase started] will flash on the display. 4 Press the ERASE button. • Playback continues while [Erase started] is flashing, and you can still fast-forward or rewind just as in normal playback, allowing you to quickly locate the end position. If the file reaches the end while the message is flashing, the file's end becomes the end position of the partial erase. • The display switches to [Partial erasing!], and partial erasing starts. [Partial erase completed] appears when the file is partially erased. • If you do not press the ERASE button within 8 seconds, partial erase will be canceled, and the recorder will return to the playback mode. EN 51