Onkyo PR-SC5509 Owner Manual - Page 47
Recording
View all Onkyo PR-SC5509 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Changing the Source Components You can change the source components activated by the Easy Macro mode. 1 While holding down REMOTE MODE for the playback component you wish to assign, press and hold down the ACTIVITIES to be changed (MY MOVIE, MY TV, or MY MUSIC) (about 3 seconds). ACTIVITIES flashes twice, indicating that the change is complete. Examples: If you wished to use MY MOVIE to start the playback component assigned to VCR/DVR of REMOTE MODE, you would press and hold down MY MOVIE for about 3 seconds while pressing down VCR/DVR of REMOTE MODE. Restoring Default You can restore ACTIVITIES to the default settings. 1 While holding down HOME, press and hold down ALL OFF until ALL OFF lights (about 3 seconds). 2 Release HOME and ALL OFF, and press ALL OFF again. ALL OFF flashes twice. Recording This section explains how to record the selected input source to a component with recording capability. AV Recording Audio sources can be recorded to a recorder (e.g., cassette tape deck, CDR, MD recorder). Video sources can be recorded to a video recorder (e.g., VCR, DVD recorder). 1 Use the input selector buttons to select the source that you want to record. You can watch the source while recording. The AV controller's MASTER VOLUME control has no effect on recording. 2 On your recorder, start recording. 3 On the source component, start playback. If you select another input source during recording, that input source will be recorded. En 47