Onkyo PR-SC5509 Owner Manual - Page 94

7 Press RECEIVER followed by SETUP on the remote controller. The setup menu will be displayed on the TV screen. The procedures thereafter can also be performed on the AV controller by using its SETUP, arrow and ENTER buttons. 8 Select "Hardware Setup" and press ENTER. 9 Select "Firmware Update" and press ENTER. 10 Select "via USB" and press ENTER. 11 Select "Update" and press ENTER. The update process will begin. During the update process, the on-screen display may disappear depending on the updated program. When this occurs, you can still view the update progress on the front display of the AV controller. The on-screen display will reappear after the update is complete, and upon turning the AV controller off and on again. Do not turn off the AV controller and do not remove the USB device during the update process. 12 The message "Completed!" appears on the front display of the AV controller, indicating that the update has been completed. Remove the USB device. 13 Turn off the AV controller using ON/STANDBY on the front panel. Do not use RECEIVER on the remote controller. Once turned off, the AV controller will automatically turn on again. Congratulations! You now have the latest firmware installed on your Onkyo AV controller. Troubleshooting Case 1: If "No Update" is displayed on the front display of the AV controller, it means that the firmware has already been updated. You do not need to do anything further. Case 2: If an error occurs, "Error!! *-**" is displayed on the front display of the AV controller. (Alpha-numeric characters on the front display are denoted by asterisks.) Refer to the following table and take appropriate action. ■ Errors during an update via USB Error Code *-10, *-20 *-14 Others Description The USB device was not detected. Make sure the USB flash memory or USB cable is properly connected to the USB port. If the USB storage device has its own power supply, use it to power the USB device. The firmware file was not found in the root folder of the USB device, or the firmware file is for another model. Retry and download the file on the support page of the web site, following the on-site instructions. If the error persists, please contact Onkyo Support and provide the error code. Retry the update procedure from the beginning. If the error persists, please contact Onkyo Support and provide the error code. Case 3: If an error occurs during the update process, disconnect then reconnect the AC power cord and try again. Case 4: If an error occurs due to a wrong selection of input sources, turn off and on the AV controller. Then retry the update. 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN http://www.onkyo.com/ The Americas 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-229-1687, 201-785-2600 Fax: 201-785-2650 Hours: M-F 9am-8pm/Sat-Sun 10am-4pm ET http://www.us.onkyo.com/ Europe Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/ China, Hong Kong Unit 1033, 10/F, Star House, No 3, Salisbury Road, Tsim Sha Tsui Kowloon, Hong Kong. Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.onkyochina.com/ Asia, Oceania, Middle East, Africa En Please contact an Onkyo distributor referring to Onkyo SUPPORT site. http://www.intl.onkyo.com/support/local_support/index.html 94