Onkyo TX-NR1007 Owner Manual - Page 52
Analog Audio Input Setup, Use the Left and Right
View all Onkyo TX-NR1007 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
First Time Setup-Continued Analog Audio Input Setup If you connect a component to the AV receiver's analog multichannel input, you must assign that input to an input selector. For example, if you connect your DVD/ BD player to the MULTI CH input, you must assign it to the DVD/BD input selector. 1 Press the [RECEIVER] button, followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 5 Press the [SETUP] button. The setup menu closes. Notes: • To listen to the component connected to the multi- channel input, press the [AUDIO] button and select the "Audio selector" (see page 114). • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 2 Use the Up and Down [R]/[X] but- tons to select "1. Input/Output Assign", and then press [ENTER]. The "Input/Output Assign" menu appears. 1. Input/Output Assign 1. Monitor Out 2. HDMI Input 3. Component Video Input 4. Digital Audio Input 5. Analog Audio Input 3 Use the Up and Down [R]/[X] but- tons to select "5. Analog Audio Input", and then press [ENTER]. The "Analog Audio Input" menu appears. 1-5. Analog Audio Input Multich Subwoofer Input Sensitivity - - - - - 4 Use the Left and Right [F]/[S] buttons to select an input selec- tor. You can assign the multichannel input to the following input selectors: "DVD/ BD", "VCR/DVR", "CBL/SAT", "GAME", "AUX", "TV/TAPE", "CD", or "PHONO". If you don't want to assign the multichannel input, set to "- - - - -". 52