Onkyo TX-NR1007 Owner Manual - Page 64
Setting the Display Brightness, Muting the AV Receiver, Using the Sleep Timer, North, American models
View all Onkyo TX-NR1007 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Basic Operations-Continued Setting the Display Brightness You can adjust the brightness of the AV receiver's display. Remote controller Press the [RECEIVER] button, and then press the [DIMMER] button repeatedly to select: • Normal + VOLUME light on. • Normal + VOLUME light off. • Dim + VOLUME light off. • Dimmer + VOLUME light off. Alternatively, you can use the AV receiver's [DIMMER] button (North American models). Muting the AV Receiver You can temporarily mute the output of the AV receiver. Remote controller Press the [RECEIVER] button, and then press the [MUTING] button. The output is muted and the MUTING indicator flashes on the display, as shown. Using the Sleep Timer With the sleep timer, you can set the AV receiver to turn off automatically after a specified period. Remote controller Press the [RECEIVER] button, and then press the [SLEEP] button repeatedly to select the required sleep time. The sleep time can be set from 90 to 10 minutes in 10 minute steps. The SLEEP indicator appears on the display when the sleep timer has been set. The specified sleep time appears on the display for about five seconds, then the previous display reappears. If you need to cancel the sleep timer, press the [SLEEP] button repeatedly until the SLEEP indicator disappears. To check the time remaining until the AV receiver sleeps, press the [SLEEP] button. Note that if you press the [SLEEP] button while the sleep time is being displayed, you'll shorten the sleep time by 10 minutes. To unmute the AV receiver, press the [MUTING] button again, or adjust the volume. The Mute function is cancelled when the AV receiver is set to Standby. Tip: You can specify how much the output is muted with the "Muting Level" setting (page 105). 64