Onkyo TX-NR1007 Owner Manual - Page 79

Using the Listening Modes-Continued Stereo Source (2/2) Listening Mode Button ✔: Available Listening Modes Speaker layout LH RH LH RH LH RH *1 LH *2 *1 RH *2 LW FL C FR RW LW FL C FR RW LW FL C FR RW LW FL C FR RW *1 *1 *2 *2 SW SW SW SW SW SW SW SW SL SR SL SR SL SR SL SR PLII/PLIIx Game*3 THX Games PLII/PLIIx Game Audyssey DSX*4 PLllz Height THX Games Neural THX Games PLII Game Ultra2 Games PLIIz Height Ultra2 Games Orchestra SBL SBR SBL SBR SBL SBR ✔ ✔ ✔ *2 *2 SBL SBR ✔ ✔*2 1*2 Unplugged ✔ ✔*1*2 Studio-Mix ✔ ✔*1*2 TV Logic ✔ ✔*1*2 Game-RPG ✔ ✔*1*2 Game-Action ✔ ✔*1*2 Game-Rock ✔ ✔*1*2 Game-Sports ✔ ✔*1*2 All Ch Stereo ✔ ✔ ✔*1*2 Full Mono ✔ ✔ ✔*1*2 T-D (TheaterDimensional) Neo:6 Cinema DTS Surround Sensation Neo:6 Music DTS Surround Sensation ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Notes: *1 For 7ch output, output can be switched between Front high or Front wide speakers by pressing the [SP LAYOUT] button (depending on the "Speaker Configuration" setting (see page 90)). *2 For 9ch output, output can be switched between the combination of Surround back and Front high, or Surround back and Front wide speakers by pressing the [SP LAYOUT] button. *3 If there are no surround back speakers, or Powered Zone 3 is being used, Dolby Pro Logic II is used. *4 This listening mode can be selected only when all the following conditions are satisfied: a. Center speaker is connected to the AV receiver. b. Either of Front High speakers or Front Wide speakers is connected to the AV receiver. *5 This listening mode is not available while you are using Zone 2 ("Not Available" will appear on the display). If you turn Zone 2 on during the Pure Audio listening mode, the listening mode will change to Direct. • Available sampling rate for PCM input signal is 32/44.1/48/88.2/96/176.4/192kHz. • The listening modes cannot be selected with some source formats. 79