Onkyo TX-NR1007 Owner Manual - Page 57
Using Audyssey MultEQ, and connect - microphone
View all Onkyo TX-NR1007 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
First Time Setup-Continued Using Audyssey MultEQ® XT 1 ON/STANDBY 2 Speaker setup microphone ENTER 3 RXFS Notes: • If any of your speakers is 4 ohms, change "Speaker Impedance" setting before running Audyssey MultEQ XT Room Correction and Speaker Setup (see page 53). • If the AV receiver is muted, it will be unmuted automatically when Audyssey MultEQ XT Room Correction and Speaker Setup starts. • Room correction and speaker setup cannot be performed while a pair of headphones is connected. • It takes about 30 minutes to complete the room correction and speaker setup for eight positions. Total measurement time varies depending on the number of speakers. • Do not disconnect the speaker setup microphone during the room correction and speaker setup, unless you want to cancel the setup. • Do not connect or disconnect any speakers during the room correction and speaker setup. Turn on the AV receiver and the connected TV. On the TV, select the input to which the AV receiver is connected. Set the speaker setup microphone at the Main Listening Position B (page 56), and connect it to the SETUP MIC jack. The speaker setting menu appears. MultEQ XT: Auto Setup Speakers Type(Front) Powered Zone2 Powered Zone3 Normal Not Act Not Act If you change these settings, refer to step 5 on "Speaker Settings" (page 53) or step 4 on "Setting the Powered Zone 2/3" (page 127). When you've finished, press the [ENTER] button. MultEQ XT: Auto Setup Please place setup microphone at center of listening area at ear height. Next Notes: • Before starting Audyssey MultEQ XT Room Correction and Speaker Setup, arrange the room and connect the speakers as you would for enjoying movies. Changes to the room after auto setup requires you run the auto setup again, as room EQ characteristics may have changed. • When starting the room correction and speaker setup, do not stand between the speakers and microphone, and avoid obstacles blocking the path between speakers and microphone. This will produce inaccurate results. • Position the microphone at ear height of a seated listener with the microphone tip pointed directly at the ceiling using a tripod. Do not hold the microphone in your hand during measurements as this will produce inacurate results. 57