Onkyo TX-NR818 Owner Manual - Page 41

SP (speaker layout) ; Listening mode buttons 9 Input Source The following audio formats are supported by the listening modes. " 4 % ' ( ) This is mono (monophonic) sound. This is stereo (stereophonic) sound. Two independent audio signal channels are reproduced through two speakers. This is 5.1-channel surround sound. This surround system has five main channels of sound and a sixth subwoofer channel (called the point-one channel). This is 7.1-channel surround sound. This is a further sound enhancement to 5.1-channel sound with two additional speakers that provide greater sound envelopment and more accurate positioning of sounds. This is DTS-ES surround sound. This surround system can produce a discrete or a matrix-encoded sixth channel from existing DTS 5.1 encoded material. This is Dolby Digital EX surround sound. This provides a center back surround channel from 5.1channel sources. Speaker Layout The illustration shows which speakers are activated in each channel. See "Speaker Configuration" for the speaker setup (➔ page 60). $ /*1 # C 7 En-41 .*2 Turning On & Basic Operations + , - *1 Press RECEIVER followed by SP (speaker layout) repeatedly to select the speakers you want to use: front high, front wide, or surround back. *2 After enabling the corresponding speakers, press RECEIVER followed by SP (speaker layout) repeatedly to select the layout you want to use. These layouts are only available when "Preout to External Amplifier" (➔ page 59) is enabled.