Onkyo TX-NR818 Owner Manual - Page 87

Controlling MHL-Enabled Mobile Device By programming the supplied remote controller with the appropriate remote control code, you can use it to operate your MHL-enabled mobile device. Connect your MHL-enabled mobile device to the AUX INPUT MHL jack. We advise you to program the remote control code on the AUX button. Use the following remote control codes: (North American models) ` 33101: MHL-enabled mobile device (European, Australian, and Asian models) ` 32910: MHL-enabled mobile device Note • With some mobile devices, reliable operation cannot be guaranteed. Controlling a Blu-ray Disc/DVD Player, HD DVD Player or DVD Recorder BD/DVD is preprogrammed with the remote control code for controlling a component that supports the Q*1 (limited to some models). The component must be able to receive remote control commands via Q and be connected to the AV receiver via HDMI. Use the following remote control codes: ` 32910/33101/33501/31612: Blu-ray Disc/DVD player with Q *1 The Q supported by the AV receiver is the CEC system control function of the HDMI standard. Press the appropriate REMOTE MODE button first. I J K B L C M D E N F G H O En-87 Controlling Other Components ■ TV operation Available buttons B , INPUT, TV VOL R/X C GUIDE D R/X/F/S ENTER E SETUP F , *1 G A (Red)*1 B (Green)*1 C (Yellow)*1 D (Blue)*1 H Number: 1 to 9, 0 Number: +10*1 I DISPLAY K MUTING L CH +/- M PREV CH N RETURN O CLR ■ Blu-ray Disc/HD DVD player operation Available buttons C TOP MENU D R/X/F/S ENTER E SETUP F ,  G A (Red) B (Green) C (Yellow) D (Blue) H Number: 1 to 9, 0 Number: +10*1 I DISPLAY J SOURCE K MUTING L CH +/- DISC +/- M MENU N RETURN O CLR