Onkyo TX-NR818 Owner Manual - Page 94

Make sure you've selected the correct remote controller mode. 12, 86 When using the remote controller to control other - manufacturers' AV components, some buttons may not work as expected. Make sure you've entered the correct remote control 85 code. Make sure to set the same ID on both the AV receiver 77 and remote controller. ■ Can't control other components If it's an Onkyo component, make sure that the V 21 cable and analog audio cable are connected properly. Connecting only an V cable won't be enough. Make sure you've selected the correct remote controller mode. 12, 86 If you've connected an cassette tape deck to the 48 TV/CD IN jack, or an RI Dock to the TV/CD IN or GAME 1 IN jacks, for the remote controller to work properly, you must set the input display appropriately. If you cannot operate it, you will need to enter the 84 appropriate remote control code. To control another manufacturer's component, point 85 the remote controller at that component. To control an Onkyo component that's connected via 86 V, point the remote controller at the AV receiver. Be sure to enter the appropriate remote control code first. To control an Onkyo component that's not connected 86 via V, point the remote controller at the component. Be sure to enter the appropriate remote control code first. The entered remote control code may not be correct. - If more than one code is listed, try each one. ■ Can't learn commands from another remote controller When learning commands, make sure that the 89 transmitting ends of both remote controllers are pointing at each other. Are you trying to learn from a remote controller that - cannot be used for learning? Some commands cannot be learned, especially those that contain several instructions. RI Dock for iPod/iPhone ■ There's no sound Make sure your iPod/iPhone is actually playing. - Make sure your iPod/iPhone is properly inserted in - the Dock. Make sure the AV receiver is turned on, the correct - input source is selected, and the volume is turned up. Make sure the plugs are pushed in all the way. - Try resetting your iPod/iPhone. - ■ There's no video Make sure that your iPod/iPhone model's TV OUT - setting is set to On. Make sure the correct input is selected on your TV or - the AV receiver. Some versions of the iPod/iPhone do not output - video. ■ The AV receiver's remote controller doesn't control my iPod/iPhone Make sure your iPod/iPhone is properly inserted in - the Dock. If your iPod/iPhone is in a case, it may not connect properly to the Dock. Always remove your iPod/iPhone from the case before inserting it into the Dock. The iPod/iPhone cannot be operated while it's - displaying the Apple logo. Make sure you've selected the right remote mode. 83 When you use the AV receiver's remote controller, - point it toward your AV receiver. If you still can't control your iPod/iPhone, start - playback by pressing your iPod/iPhone model's Play button. Remote operation should then be possible. Try resetting your iPod/iPhone. - En-94 Appendix Depending on your iPod/iPhone, some buttons may - not work as expected. ■ The AV receiver unexpectedly selects my iPod/iPhone as the input source Always pause iPod/iPhone playback before selecting - a different input source. If playback is not paused, the Direct Change function may select your iPod/iPhone as the input source by mistake during the transition between tracks. ■ iPod/iPhone doesn't work properly Try reconnecting your iPod/iPhone. - Zone 2/3 ■ There's no sound Only components connected to analog inputs can be - played in Zone 2/3. ■ The Zone 2/3 speakers produce no sound If the "Speakers Type (Front)" setting is set to other 59 than "Normal", Powered Zone 2/3 cannot be used. Music Server and Internet Radio ■ Can't access the server or Internet radio Check the network connection between the AV 107 receiver and your router or switch. Make sure that your modem and router are properly - connected, and make sure they are both turned on. Make sure the server is up and running and 108 compatible with the AV receiver. Check the "Network"settings. 76 ■ Playback stops while listening to music files on the server Make sure your server is compatible with the AV 108 receiver.