Onkyo TX-NR818 Owner Manual - Page 79
Controlling Multi Zone Components, En-79
View all Onkyo TX-NR818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Connecting the Zone Speakers to an Additional Amplifier This setup allows 7.1-channel playback in your main listening room and 2-channel stereo playback in Zone 2/3. Main room TV AV receiver Zone 2 IN R L Receiver/ integrated amp Zone 3 IN R L Receiver/ integrated amp Note • The volume of Zone 2/3 must be set on the Zone 2/3 amplifier. Controlling Multi Zone Components ■ Operating on the AV receiver Input selector buttons MASTER VOLUME ZONE 3 ZONE 2 OFF Tip • The Whole House Mode function shares the input source of main room with Multi Zone (➔ page 49). 1 To turn on Zone 2/3 and select an input source, press ZONE 2 or ZONE 3 followed by an input selector button within 8 seconds. Zone 2/3 turns on, the Z2 or Z3 indicator lights on the AV receiver's display. Tip • The corresponding trigger output goes high (+12 V). To select AM or FM, press TUNER input selector and ZONE 2 or ZONE 3 repeatedly. To select the same source as the main room's, press ZONE 2 or ZONE 3 twice. "Zone 2 Selector: Source" or "Zone 3 Selector: Source" appears on the AV receiver's display. Advanced Operations 2 To turn off Zone 2/3, press ZONE 2 or ZONE 3. The Z2/Z3 indicator on the AV receiver's display flashes. Press OFF. The zone is turned off. Tip • The corresponding trigger output goes low (0 volts). ■ Operating on the remote controller To control Zone 2/3, you must press ZONE on the remote controller first. ZONE turns red when Zone 2 is on, and green when Zone 3 is on. RECEIVER ZONE Input selector buttons MUTING VOLR/X 1 Press ZONE repeatedly, then point the remote controller at the AV receiver and press RECEIVER. Zone 2/3 turns on, the Z2 or Z3 indicator lights on the AV receiver's display. Tip • The corresponding trigger output goes high (+12 V). To be continued En-79