Onkyo TX SR576 Owner Manual - Page 40
Continued, For TX-SR576, Notes, HDMI1
UPC - 751398008078
View all Onkyo TX SR576 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
First Time Setup-Continued 4 Press the [SETUP] button. 4 Setup closes. Note: • This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons. For TX-SR576 1 Press the [RECEIVER] button, followed by the [SETUP] button. 5 Use the Up and Down [ ]/[ ] buttons to select an input selector, and use the Left and Right [ ]/[ ] buttons to select: HDMI1: Select if the video compo- nent is connected to HDMI IN 1. HDMI2: Select if the video component is connected to HDMI IN 2. HDMI3: Select if the video component is connected to HDMI IN 3 Select if you're not using the HDMI OUT. Press the [SETUP] button. Setup closes. 2 Use the Up and Down [ ]/[ ] buttons to select "1.Input Assign," and then press [ENTER]. Notes: • Each HDMI IN cannot be assigned to more than one input selector. • When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN. See "Digital Input Setup" on page 42. • This procedure can also be performed on the AV 3 Use the Up and Down [ ]/[ ] buttons to select "1-1.HDMI," and receiver by using its [SETUP], [ENTER], and arrow buttons. then press [ENTER]. 40