Onkyo TX SR576 Owner Manual - Page 70
Speaker Levels, Notes, TX-SR576 only
UPC - 751398008078
View all Onkyo TX SR576 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Advanced Setup-Continued 8 Press the [SETUP] button. Setup closes. Notes: • The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Left distance. For example, if the Left distance is set to 20 ft. (6 m), the Center and Subwoofer distances can be set between 15 and 25 ft. (4.5 and 7.5 m). • The Surround and Surround Back distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Left distance. For example, if the Left distance is set to 20 ft. (6 m), the SurrRight, Surr Left, Surr Back R, and Surr Back L distances can be set between 5 and 25 ft. (1.5 and 7.5 m). • The speaker distance cannot be adjusted while a pair of headphones is connected or the multichannel DVD input is being used. Speaker Levels These settings are set automatically by the Automatic Speaker Setup function (see page 36). You can set the volume level of each speaker so that all speakers can be heard equally at the listening position. 1 Press the [RECEIVER] REMOTE MODE button, followed by the [SETUP] button. If you have a TX-SR506, proceed to step 3. 2 (TX-SR576 only) Use the Up and Down [ ]/[ ] buttons to select "2.Speaker Setup," and then press the [ENTER] button. 3 Use the Up and Down [ ]/[ ] buttons to select "Level Cal," and then press [ENTER]. A pink noise test tone is output by the front left speaker. 4 Turn up the volume so that you can hear the test tone suffi- ciently. As each speaker outputs the test tone, its name appears on the display. 5 Use the Left and Right [ ]/[ ] buttons to adjust the speaker level, and use the Down [ ] but- ton to select the next speaker. The levels can be adjusted from -12 to +12 dB in 1 dB steps (-15 to +12 dB for the subwoofer). 6 Repeat step 5 so that the level of the test tone coming from each speaker is the same. Speakers that you set to No or None in the Speaker Configuration (page 67) do not output the test tone. 7 Press the [SETUP] button. Setup closes. Don't forget to turn down the volume if you turned it up while setting the levels. Note: • The speaker levels cannot be adjusted while a pair of headphones is connected or the AV receiver is muted. 70