Onkyo TX SR606 Instruction Manual - Page 73
Low-Pass Filter for the LFE Channel
UPC - 751398008092
View all Onkyo TX SR606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Advanced Setup-Continued 7 Use the Down [ ] button to select "Surround," and then use the Left and Right [ ]/[ ] buttons to select a crossover frequency. If no surround left and right speakers are connected, select None. Note: • Cannot select Full Band if Front (step 5) is set to anything other than Full Band. 8 Use the Down [ ] button to select "Surr Back," and use the Left and Right [ ]/[ ] buttons to select a crossover frequency. If no surround back speakers are connected, select None. Notes: • If the Surround setting in step 7 is set to None, or Powered Zone 2 is being used, this setting does not appear. • Cannot select Full Band if Surround (step 7) is set to anything other than Full Band. 9 Use the Down [ ] button to select "Surr Back Ch," and use the Left and Right [ ]/[ ] buttons to select 2ch or 1ch. 2ch: Select if two (left and right) surround back speakers are connected. 1ch: Select if one surround back speaker is connected. Note: • If the Surround or SurrBack settings in steps 7 and 8 are set to None, this setting does not appear. Continue with step 10 of the "Low-Pass Filter for the LFE Channel" setting. Note: • These settings cannot be changed while headphones are connected or the multichannel DVD input is being used. Low-Pass Filter for the LFE Channel This setting is not set automatically by the Automatic Speaker Setup function (see page 38). With this setting, you can specify the cutoff frequency of the LFE channel's low-pass filter (LPF), which can be used to filter out unwanted hum. The LPF only applies to sources that use the LFE channel. 10 Use the Down [ ] button to select "LPF of LFE," and then use the Left and Right [ ]/[ ] but- tons to select a lowpass filter fre- quency. The following low-pass filter frequen- cies can be selected: 80Hz, 90Hz, 100Hz, or 120Hz. Continue with step 11 of the "Double Bass" setting on the next page. 73