Onkyo TX SR606 Instruction Manual - Page 74
Double Bass, Speaker Distance
UPC - 751398008092
View all Onkyo TX SR606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Advanced Setup-Continued Double Bass This setting is not set automatically by the Automatic Speaker Setup function (see page 38). With the Double Bass function, you can boost bass output by feeding bass sounds from the front left, right, and center channels to the subwoofer. This function can be set only if the Subwoofer setting (step 3) is set to Yes, and the Front setting (step 4) is set to Full Band in the Speaker Configuration on page 72. 11 Use the Down [ ] button to select "Double Bass," and then use the Left and Right [ ]/[ ] buttons to select: On: Double Bass function on. Bass from the front left and right channels is also fed to the subwoofer (default). Off: Double Bass function off. 12 Press the [SETUP] button. Setup closes. Speaker Distance These settings are set automatically by the Automatic Speaker Setup function (see page 38). With these settings, you can specify the distance from each speaker to the listening position. 1 Measure and make a note of the distance from each speaker to the listening position. 2 Press the [RECEIVER] REMOTE MODE button, followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 3 Use the Up and Down [ ]/[ ] buttons to select "2. Speaker Setup," and then press the [ENTER] button. Note: • These settings cannot be changed while headphones 4 are connected or the multichannel DVD input is being used. Use the Up and Down [ ]/[ ] buttons to select "3. Speaker Distance," and then press [ENTER]. 5 While "Unit" is displayed, use the Left and Right [ ]/[ ] buttons to select "feet" or "meters". feet: Distances can be set in feet. Range: 1 to 30 feet in 1-foot steps. meters: Distances can be set in meters. Range: 0.3 to 9 meters in 0.3-meter steps. 74