Onkyo TX SR606 Instruction Manual - Page 97
Video - troubleshooting
UPC - 751398008092
View all Onkyo TX SR606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Troubleshooting-Continued The subwoofer produces no sound • If the source material contains no audio in the LFE channel, the subwoofer produces no sound. • Check the Speaker Configuration (page 72). The Zone 2 speakers produce no sound • The Zone 2 speakers only output sources that are con- nected to an analog input. Check to see if the source component is connected to an analog input. • Powered Zone 2 cannot be used if Speaker Type is set to Bi-Amp (page 42). There's no sound with a certain signal format • Check the digital audio output setting on the source component. On some game consoles, such as those that can play DVDs, the default setting is off. • With some DVD-Video discs, you need to select an audio format from a menu or with the AUDIO button on your DVD player's remote controller. Can't get 6.1- or 7.1-channel playback • While Powered Zone 2 is being used, playback in the main room is reduced to 5.1-channels and the surround back speakers produce no sound (page 83). Can't select the Pure Audio listening mode • The Pure Audio listening mode cannot be selected while Zone 2 is on. • The Pure Audio listening mode is not available on the North American model. The volume cannot be set to 79 (99) • Check to see if a maximum volume has been set (page 78). • After the Automatic Speaker Setup function has been run, or the volume level of each individual speaker has been adjusted (pages 38 and 75), the maximum volume may be reduced. • When the levels of each speaker have been adjusted (page 75), the maximum possible volume may be reduced. • When the Equalizer setting (page 76) is set to Audyssey, the maximum possible volume is reduced by 6 dB. Noise can be heard • Using cable ties to bundle audio cables with power cords, speaker cables, and so on can degrade audio performance, so don't use them. • An audio cable may be picking up interference. Try repositioning your cables. The Late Night function doesn't work • Make sure that the source is Dolby Digital or Dolby TrueHD (page 69). The analog multichannel input doesn't work • Check the multichannel input connections (page 25). • Make sure that the multichannel input is selected (page 47). • Check the audio output settings on your DVD player. About DTS signals • When playing DTS program material, using the pause, fast forward, or fast reverse function on your player may produce a short audible noise. This is not a malfunction. • When DTS program material ends and the DTS bitstream stops, the AV receiver remains in DTS listening mode and the DTS indicator remains on. This is to prevent noise when you use the pause, fast forward, or fast reverse function on your player. If you switch your player from DTS to PCM, as the AV receiver does not switch formats immediately, you may not hear anything, in which case you should stop your player for about 3 seconds, and then resume playback. • With some CD players, you won't be able to playback DTS material properly even though your player is connected to a digital input on the AV receiver. This is usually because the DTS bitstream has been processed (e.g., output level, sampling rate, or frequency response changed) and the AV receiver doesn't recognize it as a genuine DTS signal. In such cases, you may hear noise. The beginning of audio received by an HDMI IN can't be heard • Since it takes longer to identify the format of an HDMI signal than it does for other digital audio signals, sound may not be output immediately. Video There's no picture • Make sure that all video connecting plugs are pushed in all the way (page 20). • Make sure that each video component is properly con- nected. • On your TV, make sure that the video input to which the AV receiver is connected is selected. • While the Pure Audio listening mode is selected, the video circuitry is turned off and only the HDMI OUT outputs video signals. • If the video source is connected to an HDMI input, you must assign that input to an input selector (page 43), and your TV must be connected to the HDMI OUT (page 31). • If the video source is connected to a component video input, you must assign that input to an input selector (page 44), and your TV must be connected to either the HDMI OUT or COMPONENT VIDEO OUT (page 31, 23). • If the video source is connected to an S-Video or composite video input, your TV must be connected to the HDMI OUT or the corresponding S-Video or composite video output (page 31, 23). 97