Onkyo TX SR606 Instruction Manual - Page 76
Equalizer Settings
UPC - 751398008092
View all Onkyo TX SR606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Advanced Setup-Continued Equalizer Settings 5 These settings are set automatically by the Automatic Speaker Setup function (see page 38). Here you can adjust the tone of individual speakers. To set the volume of individual speakers, see page 75. 1 Press the [RECEIVER] REMOTE MODE button, followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 6 2 Use the Up and Down [ ]/[ ] buttons to select "2. Speaker Setup," and then press the [ENTER] button. 3 7 Use the Up and Down [ ]/[ ] buttons to select "5. Equalizer Settings," and then press [ENTER]. Press the Down [ ] button, and then use the Left and Right [ ]/[ ] buttons to select a speaker. 2-5. Equalizer Settings Equalizer Channel 63Hz 250Hz 1000Hz 4000Hz 16000Hz Manual Front 0dB 0dB 0dB 0dB 0dB Use the Up and Down [ ]/[ ] buttons to select a frequency. Use the Left and Right [ ]/[ ] buttons to adjust the level at that frequency. The volume at each frequency can be adjusted from -6 to +6 dB in 1 dB steps. Tip: Low frequencies (e.g., 63Hz) affect bass sounds; high frequencies (e.g., 16000Hz) affect treble sounds. Use the Up [ ] button to select "Channel," and then use the Left and Right [ ]/[ ] buttons to select another speaker. Repeat steps 5 and 6 for each speaker. Speakers that you've set to No or None in the Speaker Configuration (page 72) cannot be selected. 4 76 Use the Left and Right [ ]/[ ] buttons to select: Off: Tone off, response flat. Audyssey: The tone for each speaker is set automatically by the Automatic Speaker Setup function. Be sure to select this setting after having performed the Automatic Speaker Setup. Manual: You can adjust the equalizer for each speaker manually. If you selected Manual, continue with this procedure. If you selected Off or Audyssey, go to step 8. 8 Press the [SETUP] button. The setup menu closes. Notes: • The front, center, surround, and surround back speak- ers can be adjusted at 63Hz, 250Hz, 1000Hz, 4000Hz, and 16000Hz. The subwoofer can be adjusted at 25Hz, 40Hz, 63Hz, 100Hz, and 160Hz. • While the Direct or Pure Audio listening mode is selected, the equalizer settings have no effect. • This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.