Onkyo TX SR607 Owner Manual - Page 85
Zone 2, Connecting Zone 2
UPC - 751398008719
View all Onkyo TX SR607 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Zone 2 In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you can select a different source for each room. Connecting Zone 2 (Other models) There are two ways you can connect Zone 2 speakers: Main room 1. Connect them directly to the AV receiver. 2. Connect them to an amp in Zone 2. TV Connecting Your Zone 2 Speakers Directly to the AV receiver This setup allows 5.1-channel playback in your main room and 2-channel stereo playback in Zone 2, with a different source in each room. This is called Powered Zone 2, as the Zone 2 speakers are powered by the AV receiver. Note that when Powered Zone 2 is turned off, you can enjoy 7.1-channel playback in your main room. AV receiver To use this setup, you must set the "Powered Zone 2" setting to "Act" (see page 86). Hookup • Connect your Zone 2 speakers to the AV receiver's ZONE 2 L/R speaker terminals. (North American/Taiwan models) Main room TV Zone 2 R L Notes: • With this setup, the Zone 2 volume is controlled by the AV receiver. • Powered Zone 2 cannot be used if "Speaker Type" is set to "Bi-Amp" (see page 43). AV receiver Zone 2 R L 85