Onkyo TX SR607 Owner Manual - Page 88
Controlling Zone 2 with the Remote, Controller, Adjusting the Volume for Zone 2, Muting Zones - how many speakers in zone2
UPC - 751398008719
View all Onkyo TX SR607 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Zone 2-Continued Controlling Zone 2 with the Remote Controller ON/ STANDBY INPUT SELECTOR ZONE2 Adjusting the Volume for Zone 2 Remote controller On the remote controller, press the [ZONE 2] button, and then use the VOL [R]/[X] button. Note: To control Zone 2, you must press the remote controller's [ZONE 2] button first. 1 Press the [ZONE 2] button, then point the remote controller at the AV receiver and press the [ON/ STANDBY] button. Zone 2 turns on, the ZONE 2 indicator lights up. 2 To select an input source for Zone 2, press the [ZONE 2] button, followed by an INPUT SELECTOR button. To select AM or FM press the [TUNER] INPUT SELECTOR button repeatedly. On the North American model, you can also select SIRIUS. Note: You cannot select different AM or FM radio stations for your main room and Zone 2. The same AM/FM radio station will be heard in each room. 3 To turn off Zone 2, press the [ZONE 2] button, followed by the [ON/STANDBY] button. 88 AV receiver On the AV receiver, press the [ZONE 2] button (the ZONE 2 indicator and Zone 2 selector on the display flashes) and then use the [-]/[+] buttons within 8 seconds. If your Zone 2 speakers are connected to a receiver or integrated amp in Zone 2, use its volume control to adjust the volume. Muting Zones Remote controller On the remote controller, press the [ZONE 2] button, and then press the [MUTING] button. To unmute a zone, on the remote controller, press the [ZONE 2] button, and then press the [MUTING] button again. Notes: • Only analog input sources are output by the ZONE 2 LINE OUT and ZONE 2 L/R speaker terminals. Digital input sources are not output. If no sound is heard when an input source is selected, check if it's connected to an analog input. • While Powered Zone 2 is being used, listening modes that need surround back speakers (i.e., Dolby Digital EX and DTS-ES) are unavailable. • While Zone 2 is on, V functions will not work. • You cannot select different AM or FM radio stations for your main room and Zone 2. The same AM/FM radio station will be heard in each room. For example, if you have an FM station for the main room, that station will also be used in Zone 2. • Zones can also be unmuted by adjusting the volume.