Onkyo TX SR607 Owner Manual - Page 86
Setting the Powered Zone 2, Connecting Your Zone 2 Speakers to an, Amp in Zone 2
UPC - 751398008719
View all Onkyo TX SR607 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Zone 2-Continued Connecting Your Zone 2 Speakers to an Amp in Zone 2 This setup allows 7.1-channel playback in your main listening room and 2-channel stereo playback in Zone 2, with a different source in each room. Hookup • Use an RCA audio cable to connect the AV receiver's ZONE 2 LINE OUT L/R jacks to an analog audio input on your Zone 2 amp. • Connect your Zone 2 speakers to the speaker terminals on your Zone 2 amp. Main room TV Setting the Powered Zone 2 If you've connected your Zone 2 speakers to the AV receiver, as explained in "Connecting Your Zone 2 Speakers Directly to the AV receiver" on page 85, you must set the "Powered Zone 2" setting to "Act" (Activated). 1 Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 2 AV receiver Zone 2 IN R L Receiver/ 3 integrated amp Note: The Zone 2 volume must be set on the Zone 2 amp. Use the Up and Down [R]/[X] buttons to select "2. Speaker Setup", and then press [ENTER]. The "Speaker Setup" menu appears. 2. Speaker Setup 1. Speaker Settings 2. Speaker Configuration 3. Speaker Distance 4. Level Calibration 5. Equalizer Settings Use the Up and Down [R]/[X] buttons to select "1. Speaker Settings", and then press [ENTER]. The "Speaker Settings" menu appears. 86