Onkyo TX SR607 Owner Manual - Page 87
Using Zone 2, Controlling Zone 2 from the AV receiver
UPC - 751398008719
View all Onkyo TX SR607 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Zone 2-Continued 4 Use the Up and Down [R]/[X] buttons to select "Powered Zone 2", and use the Left and Right [F]/[S] buttons to select: Not Act: ZONE 2 L/R speaker terminals not activated (Powered Zone 2 disabled). Act: ZONE 2 L/R speaker terminals activated (Powered Zone 2 enabled). Using Zone 2 This section explains how to turn Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2. Controlling Zone 2 from the AV receiver ZONE 2 OFF 5 Press the [SETUP] button. The setup menu closes. 1 Notes: • When "Act" is selected and Zone 2 turned on, the Zone 2 speakers connected to the ZONE 2 L/R speaker terminals output sound, but the surround back or front high speakers connected to the SURR BACK/ FRONT HIGH L/R speaker terminals do not. When "Act" is selected and Zone 2 turned off, the surround back or front high speakers output sound as normal. • When the "Powered Zone 2" setting is set to "Act" and the input selector of Zone 2 is selected, power consumption on standby mode slightly increases. • Powered Zone 2 cannot be used if "Speaker Type" is set to "Bi-Amp" (see page 43). • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 2 INPUT SELECTOR To turn on Zone 2 and select an input source, press the [ZONE 2] button followed by an input selector button within 8 seconds. Zone 2 turns on, the ZONE 2 indicator lights up. To select AM or FM press the [TUNER] input selector button repeatedly. On the North American model, you can also select SIRIUS. To select the same source as that of the main room, press the [ZONE 2] button repeatedly until "Z2 Selector: Source" appears on the display. Note: You cannot select different AM or FM radio stations for your main room and Zone 2. The same AM/FM radio station will be heard in each room. To turn off Zone 2, press the [OFF] button. Notes: • While Powered Zone 2 is being used, listening modes that require surround back speakers (6.1/7.1), such as Dolby Digital EX, and DTS-ES are unavailable. • When the "Powered Zone 2" setting is set to "Act" and the input selector of Zone 2 is selected, power consumption on standby mode slightly increases. 87