Onkyo TX-SR706 Owner Manual - Page 42

First Time Setup-Continued Video Input Setup HDMI Input Setup If you connect a video component to HDMI IN, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN 1, you must assign HDMI IN 1 to the DVD input selector. If you've connected your TV to the AV receiver/AV amplifier with an HDMI cable, you can set the AV receiver/AV amplifier so that composite video, S-Video, and component video sources are upconverted* and output by the HDMI OUT. You can set this for each input selector by selecting the option. Composite video, S-Video, component video IN HDMI OUT Composite video, S-Video, component video HDMI 1 Press the [RECEIVER] button fol- lowed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 2 Use the Up and Down [R]/[X] but- tons to select "1. Input Assign", and then press [ENTER]. The "Input Assign" menu appears. 1. Input Assign 1. HDMI Input 2. Component Video Input 3. Digital Audio Input 42 3 Use the Up and Down [R]/[X] but- tons to select "1. HDMI Input", and then press [ENTER]. The "HDMI Input" menu appears. 1-1. HDMI Input DVD VCR/DVR CBL/SAT GAME/TV AUX TAPE TUNER CD PHONO HDMI1 HDMI2 HDMI3 HDMI4 4 Use the Up and Down [R]/[X] but- tons to select an input selector, and use the Left and Right [F]/ [S] buttons to select: HDMI1, HDMI2, HDMI3, HDMI4: Select the HDMI IN to which the video component has been connected. - - - - -: Output composite video, S-Video, and component video sources from the HDMI OUT. The video output signal from the HDMI OUT is the one configured in "Component Video Setup" (see page 43). Each HDMI IN cannot be assigned to more than one input selector. When HDMI1 - HDMI4 have already been assigned (as shown in the Step 3 illus- tration), you must set first any unused input selectors to or you will be unable to assign HDMI1 - HDMI4 to input selector. 5 Press the [SETUP] button. The setup menu closes. Notes: • For composite video, S-Video, and component video upconversion for the HDMI OUT, the HDMI Input setting must be set to See page 23 for more information on video signal flow and upconversion. • When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN. See "Digital Input Setup" on page 44. • On the TX-SR706, the TUNER input selector cannot be assigned and is fixed at the option. • This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.