Onkyo TX-SR706 Owner Manual - Page 87
A/V Sync, Name Edit, To correct a character, Notes - tx hdmi no signal
UPC - 751398008214
View all Onkyo TX-SR706 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Advanced Setup-Continued A/V Sync When using your DVD player's progressive scanning function, you may find that the picture and sound are out of sync. With the A/V Sync setting, you can correct this by applying a delay to the audio signal. The delay can be set from 0 to 250 milliseconds (msec) in 5 millisecond steps. Use the Left and Right [F]/[S] buttons to set the delay. To view the TV picture while setting the delay, press [ENTER]. To return to the previous screen, press the [RETURN] button. 4-2. A/V Sync DVD A/V Sync 0msec Press Enter to see picture. If HDMI Lip Sync is enabled (see page 93), and your TV or display supports HDMI Lip Sync, the displayed delay time will be the A/V Sync delay time. The HDMI Lip Sync delay time is displayed underneath in parentheses. Note: A/V Sync is disabled when the Pure Audio listening mode is selected, or when the Direct listening mode is used with an analog input source. Name Edit You can enter a custom name for each individual input selector and radio preset for easy identification. When entered, the custom name will appear on the display. The custom name is edited using the character input screen. 1. Use the arrow [R]/[X]/[F]/[S] buttons to select a character, and then press [ENTER]. Repeat this step to enter up to 10 characters. 2. When you've finished, to store a name, be sure to use the arrow [R]/[X]/[F]/[S] buttons to select "OK", and then press [ENTER]. Otherwise it will not be saved. Name input area 4-3. Name Edit Name ABCDE FGH I J KLM NOPQR S T U VWX Y Z abcde f gh i j k lm nopq r s t uvwx y z 0123456789- . ' () / , : ; ! ?_ OK CANCEL (Left)/ (Right): Selected when the cursor is moved within the Name input area. OK: Selects when the entry is complete. CANCEL: Selects when you want to cancel the name entry. To correct a character: 1. Use the arrow [R]/[X]/[F]/[S] buttons to select " "(Left) or " "(Right) and then press [ENTER]. 2. Press [ENTER] several times to select the incorrect character (The cursor moves one letter each time [ENTER] is pressed). 3. Use the arrow [R]/[X]/[F]/[S] buttons to select the correct character, and then press [ENTER]. Notes: • To name a radio preset, use the [TUNER] button to select AM or FM, and then select the preset (TX-SR706 only) (see step 1 on page 86). • You cannot enter a custom name for XM or SIRIUS radio presets. • To restore a custom name to the default, erase the custom name by entering an empty white space for each letter. • This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP], [ENTER], and arrow buttons. 87