Onkyo TX-SR706 Owner Manual - Page 83

Advanced Setup-Continued Adjust Using the AUDIO Button You can change various audio settings by pressing the [AUDIO] button. Note: When the "Audio TV Out" setting is set to "On" (page 93), the [AUDIO] button is disabled. 1 Remote controller Press the [RECEIVER] button followed by the [AUDIO] button. The setting item appears on the display. 2 Use the Up and Down [R]/[X] but- tons to select an item. 3 Use the Left and Right [F]/[S] buttons to change the setting. Repeat this step for the other settings. The Audio Adjust settings are explained below. Tone Control Settings You can adjust the bass and treble for the front speakers, except when the Direct, Pure Audio, or THX listening mode is selected. ■ Bass You can boost or cut low-frequency sounds output by the front speakers from -10 dB to +10 dB in 2 dB steps. ■ Treble You can boost or cut high-frequency sounds output by the front speakers from -10 dB to +10 dB in 2 dB steps. Notes: • This setting is not available when the multichannel DVD input is selected. • This procedure can also be performed on the AV receiver/AV amplifier by using its [TONE], [-], and [+] buttons (see page 55). Late Night Function ■ Late Night With the Late Night function, you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even when listening at low volume levels-ideal for watching movies late at night when you don't want to disturb anyone. For Dolby Digital and Dolby Digital Plus sources, the options are: Off: Late Night function off (default). Low: Small reduction in dynamic range. High: Large reduction in dynamic range. For Dolby TrueHD sources, the options are: Auto: The Late Night function is set to "On" or "Off" automatically (default). Off: Late Night function off. On: Late Night function on. Notes: • The effect of the Late Night function depends on the material that you are playing and the intention of the original sound designer, and with some material there will be little or no effect when you select the different options. • On the TX-SA706, this procedure can also be performed on the AV amplifier by using its [LATE NIGHT] button. Re-EQ Function With the Re-EQ function, you can compensate a soundtrack whose high-frequency content is too harsh, making it more suitable for home theater viewing. ■ Re-EQ This function can be used with the following listening modes: • Dolby Digital, Dolby Digital EX, Dolby Pro Logic II Movie, Dolby Pro Logic IIx Movie • DTS, DTS-ES, DTS Neo:6 Cinema, DTS 96/24 • Multichannel ■ Re-EQ (THX) This function can be used with the following listening modes: • THX Cinema, THX Surround EX, THX Select2 Cin- ema Off: Re-EQ Function off. On: Re-EQ Function on. Notes: • Settings of "On" and "Off" for the Re-EQ function are kept in each listening mode. However, in THX listening mode, when the AV receiver/AV amplifier is turned off, it will return to "On". • On the TX-SA706, this procedure can also be performed on the AV amplifier by using its [Re-EQ] button. 83