Onkyo TX-SV727 Owner Manual - Page 10

Making system connections • I)o not plug in the power cord until all connections have been made. • On each pair of input jacks, the lower jack (marked R) corresponds to the right channel, and the upper jack (marked L) to the left channel. • Please refer to the instruction manual of each component when making any connections. • eaysee,.. L R CD ■ OUT O PHONO OUT Connecting a CO player (CD) and a turntable (PHONO) Connect the output leads of the turntable to the PHONO jacks. Be sure to connect the ground (earth) lead wire from the turntable to the ground terminal (GND). Turntables not provided with GND wires do not need to be connected in this way. Place the turntable on a firm shelf or deck free from vibrations (especially those generated by the speaker system). If the turntable can pick up such unwanted vibrations, not only will the performance of the unit drop, but distortion in the bass frequencies and howling in the speakers may also occur. Connect a compact disc player to the CD input jacks. eeeeoecc,; 0 (IN) (OUT) REC PLAY L RL R TX-SV727,R EQUALIZER Second TAPE DECK •-4' 1;klee VIDEO OUT AUDIO OUT (L) (R) U 0 11 Connectng a tape deck (TAPE-1, TAPE-2) This unit has facilities for two tape decks. If you are using only one tape deck, connect it to the TAPE- I jacks. If you have two tape decks, connect one to the TAPE- I jacks and the other to the TAPE-2 jacks. If you wish to use a graphic equalizer as well as two tape decks, connect the graphic equalizer to the TAPE-2 jacks, and connect the second tape deck to the TAPE jacks on the graphic equalizer. (See the diagram.) Connect the OUTPUT jacks on the graphic equalizer to the TAPE2 PLAY jacks on the A/V Tuner Amplifier, and the INPUT jacks to the TAPE-2 REC jacks as shown. See page 30 on how to use a graphic equalizer. Connecting a Video Disc Player or Video Cassette Player (VIDEO-1, VIDEO-4) Connect the VIDEO output of the video disc player to this unit (V) VIDEO-I and/or VIDEO-4 "IN" jack and the audio output to the VIDEO-I and/or VIDEO-4 L and R "IN" jack. The VIDEO-1 and/ or VIDEO-4 jack is only for playback, there is no OUT jack. For more details, refer to the video disc player instruction manual. NOTE: The IPM function can operate only if a TV is connected to the VIDEO-1 jack. (See page f2.) VIDEO-4 When the audio output of the video equipment is monaural, connect to the R audio input jacks. 10