Optoma ZU725TST Manual - Page 24
Remote Control Effective Range
![]() |
View all Optoma ZU725TST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
SETUP AND INSTALLATION Remote Control Effective Range Infra-Red (IR) remote control sensor is located on the top and front sides of the projector. Ensure to hold the remote control at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not be longer than 20 meters (65.6 feet) when holding not longer than 30 meters (98.4 feet) when aiming the sensor at 0°. Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red beam. Make sure the IR transmitter of the projector/remote control is not being shined by sunlight or fluorescent lamps directly. Please keep the remote controller away from fluorescent lamps for over 2 m or the remote controller might become malfunction. If the remote control is close to Inverter-Type fluorescent lamps, it might become ineffective from time to time. If the remote control and the projector are within a very short distance, the remote control might become ineffective. When you aim at the screen, the effective distance is less than 5 m from the remote control to the screen and reflecting the IR beams back to the projector. However, the effective range might change according to screens. Approx. ±30° Approx. ±30° 24 English
![](/manual_guide/products/optoma-zu820t-manual-b211a58/24.png)