Optoma ZU725TST Manual - Page 54
Input Settings menu, Submenus, Latency Adjustment, Output, HDMI 1 EDID/HDMI 2 EDID, Reset
![]() |
View all Optoma ZU725TST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
USING THE PROJECTOR Input Settings menu Learn how to configure the projector input settings. Submenus Auto Source Quick Resync Active Inputs Latency Adjustment VGA HDMI Auto Source When Auto Source is enabled, the projector automatically detects and selects the input signal. Once an input source is selected, press the Input button on the remote control or keypad to switch to other available sources. When the function is disabled, pressing Input will bring up the Active Inputs submenu. Quick Resync Set the quick resync feature. Active Inputs Select an input signal from the source list. The available input sources are VGA, HDMI1, HDMI2, and HDBaseT. Latency Adjustment Enable this feature to reduce response time. VGA Setup the VGA source by selecting the proper Phase and Resolution. HDMI Set the projector's HDMI ports. Output Set the HDMI 1 or HDMI 2 port to output the signal. HDMI 1 EDID/HDMI 2 EDID When receiving a HDMI signal, set the projector's EDID compatibility to display the signal correctly. Select 1.4 for the input devices with HDMI 1.4, or 2.0 for HDMI 2.0 devices. Note: For a better 3D experience, it is recommended to choose HDMI 1.4. Reset Reset all the input settings to factory default values. 54 English
![](/manual_guide/products/optoma-zu820t-manual-b211a58/54.png)