Optoma ZU725TST Manual - Page 61

Communication menu

Get Optoma ZU725TST PDF manuals and user guides View all Optoma ZU725TST manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

USING THE PROJECTOR Communication menu Communication menu is used to configure the settings that allow the projector to communicate with other projectors or control devices. Submenus ‡ Projector ID ‡ Remote Setup ‡ Network Setup ‡ Email Notification ‡ Control ‡ Baud Rate Projector ID Assign an ID code for the projector from 00 to 99. Use this code as the projector ID when controlling the projector by RS232, Telnet or other control methods. Remote Setup Configure the settings of the Infra-Red (IR) remote control. Remote Code Press and hold the remote control ID key. When all the key lights turn on, press the number key 00-99 to assign a number. When all key lights flash rapidly twice, the remote control code has been changed. At this time, release the remote control ID key. Quick Switch Code The IR receiving function of the projector can be temporarily deactivated by hot key(0~9) to avoid the IR interference between projectors. The remote ID needs to be set to All. Note: When hotkey is on, the default function (Direct Source, Zoom/Focus, 3D) are inactive temporarily. IR Function Set the remote receiver for the projector to control the communication between the projector and the IR remote. ‡ Front: Enable or disable the front remote receiver. ‡ Top: Enable or disable the top remote receiver. ‡ HDBaseT: Select On to set the HDBaseT terminal as the remote receiver. User 1 / User 2 Assign a function to the User 1 and User 2 buttons on the remote control. It allows you to use the function easily without going through the OSD menus. The available functions are Freeze Screen [User 1 deafult], Blank Screen, PIP/PBP [User 2 default], Aspect Ratio, Information Hide, Network setup, Projector ID, Color Matching, Reset Selective, Quick Switch Code, Audio Mute, and Audio Volume. Network Setup Configure the projector's network settings. LAN Interface To avoid clash, specify the LAN interface to RJ-45 or HDBaseT. MAC Address Display the MAC address. (Read only) Network Status Display the network connection status. (Read only) DHCP English 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
English
61
USING THE PROJECTOR
Communication menu
Communication menu is used to configure the settings that allow the projector to communicate with other projectors
or control devices.
Submenus
±
Projector ID
±
Remote Setup
±
Network Setup
±
Email Notification
±
Control
±
Baud Rate
Projector ID
Assign an ID code for the projector from 00 to 99. Use this code as the projector ID when controlling the projector
by RS232, Telnet or other control methods.
Remote Setup
Configure the settings of the Infra-Red (IR) remote control.
Remote Code
Press and hold the remote control
ID
key. When all the key lights turn on, press the number key 00-99 to assign a
number. When all key lights flash rapidly twice, the remote control code has been changed. At this time, release the
remote control
ID
key.
Quick Switch Code
The IR receiving function of the projector can be temporarily deactivated by hot key(0~9) to avoid the IR
interference between projectors. The remote ID needs to be set to All.
Note:
When hotkey is on, the default function (Direct Source, Zoom/Focus, 3D) are inactive temporarily.
IR Function
Set the remote receiver for the projector to control the communication between the projector and the IR
remote.
±
Front:
Enable or disable the front remote receiver.
±
Top:
Enable or disable the top remote receiver.
±
HDBaseT:
Select On to set the HDBaseT terminal as the remote receiver.
User 1 / User 2
Assign a function to the User 1 and User 2 buttons on the remote control. It allows you to use the function
easily without going through the OSD menus. The available functions are Freeze Screen [User 1 deafult],
Blank Screen, PIP/PBP [User 2 default], Aspect Ratio, Information Hide, Network setup, Projector ID, Color
Matching, Reset Selective, Quick Switch Code, Audio Mute, and Audio Volume.
Network Setup
Configure the projector’s network settings.
LAN Interface
To avoid clash, specify the LAN interface to RJ-45 or HDBaseT.
MAC Address
Display the MAC address. (Read only)
Network Status
Display the network connection status. (Read only)
DHCP