Optoma ZU725TST Manual - Page 48
Image Shift, Warp Control
View all Optoma ZU725TST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
USING THE PROJECTOR Digital Zoom Digital adjust the size of the projected image. Proportional Enable the function to have the image's height and width changed at the same ratio. Horizontal Use the t and u buttons to change the width of the projected image. Vertical Use the p and q buttons to change the height of the projected image. Horizontal Shift Use the t and u buttons to adjust the horizontal shift the image. Vertical Shift Use the p and q buttons to adjust the vertical shift the image. Reset Reset digital zoom settings to factory default values. Note: When 3D or 2D High Speed mode is selected, the Digital Zoom will be unavailable. Image Shift Adjust the projected image position. H. Position Use the t and u buttons to adjust the projected image position horizontally. V. Position Use the p and q buttons to adjust the projected image position vertically. Reset Reset image shift settings to factory default values. Note: When 3D or 2D High Speed mode is selected, the Image Shift will be unavailable. Geometric Correction Configure the geometric settings to reshape the image for different projection surfaces. Warp Control Configure the geometric settings to reshape the image for different projection surfaces. Basic: Configure keystone, pincushion, 4-corner settings. Advanced: Configure grid color, grid background, warp setting, blend setting, and black level. AP: Use the warp and blend software tools to control the projector. When the software warp and blend control is enabled, the projector's built in geometry functions are disabled. 48 English