Optoma ZU725TST Manual - Page 81
button to exit grid pattern and then manual blending, setting is finished.
View all Optoma ZU725TST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
ADDITIONAL INFORMATION (1) Select grid point 2x2 and align boundary of projectors with the side of overlap areas. (2) Depending on the installation situation select grid points 3x3, 5x5, 9x9, or 17x17 to adjust the grid line. (3) Turn on warp inner to adjust the inner grid. (4) All the grid lines are aligned. Press "Exit" button to exit grid pattern and then manual blending setting is finished. 5. When the grid lines are warped from straight to curve, the grid lines may become distorted or jagged. To avoid this users can adjust the warp sharpness to blur or sharpen the edge of the images. English 81
English
81
ADDITIONAL INFORMATION
(1)
Select grid point 2x2 and align boundary of projectors with the side of overlap areas.
(2)
Depending on the installation situation select grid points 3x3, 5x5, 9x9, or 17x17 to adjust the grid
line.
(3)
Turn on warp inner to adjust the inner grid.
(4)
All the grid lines are aligned. Press “
Exit
” button to exit grid pattern and then manual blending
setting is finished.
5.
When the grid lines are warped from straight to curve, the grid lines may become distorted or jagged.
To avoid this users can adjust the warp sharpness to blur or sharpen the edge of the images.