Oregon Scientific WMR100N User Manual - Page 8
Set Up Base Station, Base Station, Change Display / Setting, Clock Reception - wmr100na
View all Oregon Scientific WMR100N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
EN SET UP BASE STATION NOTE Install batteries in the remote sensor before the base station matching the polarities (+ and -). For continuous use, please install the AC adapter. The batteries are for back-up use only. NOTE Make sure the adapter is not obstructed and is easily accessible to the unit. NOTE The base station and adapter should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed on the base station and adapter. BASE STATION CHANGE DISPLAY / SETTING To change the display and settings, use the following buttons on the rotating dial: SELECT, MEMORY / ON / OFF, MODE and ALARM. In addition, the UNIT and SEARCH buttons located at the bottom of the base station allows pre-setting of the remote sensor channels and the measurement units for display. TIP To exit from the setting mode, push any button. Alternatively, the base station will automatically exit after 30 seconds. CLOCK RECEPTION This product is designed to synchronize its calendar clock automatically once it is brought within range of a radio signal: WMR100N: • EU: DCF-77 signal: within 1500 km (932 miles) of Frankfurt, Germany. • UK: MSF-60 signal: within 1500 km (932 miles) of Anthorn, England. Install the base station batteries (4 x UM-3 / AA) matching the polarity + and -. Press RESET after each battery change. WMR100NA: • WWVB-60 signal: within 3200km (2000 miles) of Fort Collins Colorado. NOTE Do not use rechargeable batteries. It is recommended that you use alkaline batteries with this product for longer performance. WMR100N only - slide the EU / UK switch to the appropriate setting based on your location. Press RESET whenever you change the selected setting. NOTE Batteries should not be exposed to excessive heat such as sunshine or fire. The battery icon indicator following areas: may appear in the The reception icon will blink when it is searching for a signal. If the radio signal is weak it can take up to 24 hours to get a valid signal reception. indicates the status of the clock reception signal. AREA MEANING ICON MEANING Weather Forecast Area Battery in the base station is low. will show when AC adapter is disconnected. Temperature / Heat Index / Wind Chill Area Wind Speed / Wind Direction Area The displayed channel indicates the outdoor sensor for which battery is low. Battery in the wind sensor is low. UVI / Barometer / Rainfall Area Battery in the UV / Rain sensor is low. Time is synchronized. Receiving signal is strong Time is not synchronized. Receiving signal is weak To enable (and force a signal search) / disable the clock radio reception (clock synchronization): 1. Press SELECT to navigate to the Clock / Calendar / Alarm Area. will show next to the Area. 2. Press and hold SEARCH. appears when it is enabled. 8