Panasonic AJD455 AJD455 User Guide - Page 27

USER menu Item Superimposed No. display Setting Superimposed No. display Description 303 STD/ NON-STD 0000 0001 0002 304 SERVO REF 305 EDIT RPLCE1 0000 0001 0000 0001 0002 0003 306 EDIT RPLCE2 0000 0001 0002 0003 307 EDIT RPLCEC 0000 0001 0002 0003 309 AUD EDIT IN 0000 0001 310 AUD EDIT OUT 0000 0001 AUTO STD N-STD AUTO EXT N-DEF CH1 CH2 CH1+2 N-DEF CH1 CH2 CH1+2 N-DEF CH1 CH2 CH1+2 CUT FADE CUT FADE This selects STD or NON-STD in accordance with the composite input signal. 0: Standard/non-standard signals are automatically identified and processed. 1: Standard signals are processed. (Forced STD) 2: Non-standard signals are processed. (Forced NON-STD) This selects the video signal processing. 0: Servo is synchronized with the input signal during recording and editing, or with the REF signal during playback. 1: Servo is synchronized at all times with the REF signal. This sets the channel assignments for the controller's analog audio preset when editing the digital audio of the VTR using a controller which does not have a digital audio edit preset control function. This selects the channel concerned when the VTR CH1 edit preset is set in compliance with the ON or OFF presetting for the analog audio signals designated by the controller. 0: Not set. 1: Compliance with analog CH1 edit preset. 2: Compliance with analog CH2 edit preset. 3: Compliance with either analog CH1 or CH2 edit preset. This sets the channel assignments for the controller's analog audio preset when editing the digital audio of the VTR using a controller which does not have a digital audio edit preset control function. This selects the channel concerned when the VTR CH2 edit preset is set in compliance with the ON or OFF presetting for the analog audio signals designated by the controller. 0: Not set. 1: Compliance with analog CH1 edit preset. 2: Compliance with analog CH2 edit preset. 3: Compliance with either analog CH1 or CH2 edit preset. This sets the channel assignments for the controller's analog audio preset when editing the digital audio of the VTR using a controller which does not have a digital audio edit preset control function. This selects the channel concerned when the VTR CUE edit preset is set in compliance with the ON or OFF presetting for the analog audio signals designated by the editor or controller. 0: Not set. 1: Compliance with analog CH1 edit preset. 2: Compliance with analog CH2 edit preset. 3: Compliance with either analog CH1 or CH2 edit preset. This selects the connection method for the digital audio edit IN point. 0: Cut processing 1: V Fade processing This selects the connection method for the digital audio edit OUT point. 0: Cut processing 1: V Fade processing The underline on the setting item denotes the initial setting. 27