Panasonic AJD455 AJD455 User Guide - Page 47
AUTO OFF mode, Warning, Err-00
View all Panasonic AJD455 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Warning Priority Error No. High E-10* (Err-10) E-09* (Err-09) TV monitor display* FAN STOP NO RF Description Error No. lights when a fan motor stops operating. This appears when a blank exceeding 1 second is detected on the tape during playback. E-00* (Err-00) SERVO NOT LOCKED Error No. lights when servo disturbances continue for 3 or more seconds during playback, recording or editing. E-01* LOW RF (Err-01) Error No. lights when envelope levels approx. 1/3 that of normal levels are detected for more than 1 sec. during playback, recording or editing. Low E-02* (Err-02) HIGH ERROR RATE Error No. lights when the error rate increases and correction/interpolation is performed on either the video or audio playback signal. * Displays when warning information is checked by pressing the DIAG button. VTR operation Continued Continued Continued Continued Continued AUTO OFF mode The following error number flashes on the counter display section. Error No. TV monitor display E-20 DEW Any other number Descriptions When condensation is detected, the error no. display flashes, and the unit goes into EJECT mode. The drum rotates after the cassette tape is ejected to remove condensation. When the condensation has been removed, the error no. display disappears and the VTR may be used. 1) The drum rotates as soon as condensation is detected when the unit is in EJECT mode. 2) When condensation is detected while a cassette tape is inserted, drum rotation stops, the cassette tape is ejected and the drum rotation begins again. If any other number appears frequently, ask your dealer to inspect the unit. VTR operation (VTR measures) EJECT 47