Panasonic AJD455 AJD455 User Guide - Page 36

Setup menus USER menu (continued) Item Setting Superimposed Superimposed No. display No. display Description 720 EMBEDDED 0000 AUD 0001 721 LINE CH SEL 0000 0001 722 INT SG 0000 0001 723 DV PB ATT 729 REC PT MUTE 0000 0001 0000 0001 731 REF LEVEL 0000 0001 0002 OFF ON PCM AUTO OFF ON OFF ON OFF ON FS-20 FS-18 FS-12 This selects whether to superimpose the audio data onto the serial output. 0: Data is not superimposed. 1: Data is superimposed. This display will not appear unless the AJ-YA455P serial interface board (optional accessory) has been installed. This selects the audio output for CH1 and CH2. 0: PCM AUDIO is output. 1: PCM AUDIO is output in the -0.43× to 1× speed range; in all other cases, CUE is automatically output. The PCM AUDIO output CH1 and CH2 signals are output separately regardless of the position selected for the AUDIO MONITOR SELECT switch. This selects whether the internal signal is to be used for the audio input signal. 0: The internal signal is not selected. 1: The internal signal is selected. • The internal signal has a frequency of 997 Hz. • This setting is invalid if the VIDEO INPUT switch #3 has been set to DVCPRO/DV. This selects the audio output level for DV format playback. 0: The audio output level is not attenuated. 1: The audio output level is attenuated (reduced). For selecting whether to mute the sound at the joins between recordings during DV or DVCAM cassette playback. 0: The sound is not muted. 1: The sound is muted. For setting the audio reference level. 0: Full scale, -20 dB 1: Full scale, -18 dB 2: Full scale, -12 dB The underline on the setting item denotes the initial setting. 36